当前位置:首页 > support > ICHIB-C1-En >

Local File Selection function description-3-Load multiple files in the specified order

1) Put the firmware and a file named "list.txt" in a folder, and write the firmware list to the list.txt file (note that the firmware file name must have an extension, otherwise the firmware will not load for example: SX100.bin).

2) Load the file using ListbyFilesInsorteDorder

3) Select the required options in Read/Write Options
4) Click "Write2" (in case of write failure, you can select the starting file through the drop-down list)


4.png5.png

扫描二维码推送至手机访问。

版权声明:本文由IICHIB发布,如需转载请注明出处。

本文链接:https://www.ichib.com/post/80.html

分享给朋友:

“Local File Selection function description-3-Load multiple files in the specified order” 的相关文章

Firmware Template - Toolkits[Creating Optical Module Firmware File Template]

Firmware Template - Toolkits[Creating Optical Module Firmware File Template]

1) The template needs to be prepared in advance and stored in the corresponding folder, otherwise this function cannot be used quickly. (Template fold…

Retrieve the optical module password-Password management capabilities for ICHIB-C1

Retrieve the optical module password-Password management capabilities for ICHIB-C1

Retrieve Password: Go through a series of steps or verification methods to get a lost or forgotten password.How did this feature come about? I have a…

Cisco Transceiver Modules EEPROM programmer (Writing firmware  information tutorial)

Cisco Transceiver Modules EEPROM programmer (Writing firmware information tutorial)

Optical Transceiver Programmer for SFP, QSFP+ & MoreFrom 125M to 800G(SFP,CSFP,XFP,QSFP,QSFP-DD,OSFP) You are free to use this programmer to gener…

Local File Selection function description-2-Batch load file

Local File Selection function description-2-Batch load file

Be careful to read the instructions before operating!This note focuses on the first "Open" button, which includes the functionality of the o…

SFP optical module Read Digital Diagnostic Monitoring(DDM/DOM)

SFP optical module Read Digital Diagnostic Monitoring(DDM/DOM)

The hardware device in this demonstration is 1.25G-SFP-SXAll SFP packaged fiber modules can be used for referencePrepare multi-mode optical fiber modu…

Firmware Generation - Toolkit [Batch Generation of Optical Module Firmware Files]

Firmware Generation - Toolkit [Batch Generation of Optical Module Firmware Files]

1) First load or customize firmware content2) Check "Read/Write Options" to generate options (maximum 512 bytes)…